Control irrigation system information during high wind conditions.
Look at any sprinkler’s performance chart and you’ll see that the data was gathered from tests conducted under zero wind conditions. Of course, in the real world, not every day is a calm one. And, while most sprinklers can still perform at close to peak efficiency with some type of breeze, when the air movement starts to get stronger, water coverage can get challenging, questionable and downright messy. It can even become a liability issue when windblown sprinklers soak pedestrian paths or roadways with passing cars. The Hunter Wind-Clik offers the most cost-effective solution to such situations as it shuts off irrigation systems during periods of high wind (shut down points are adjustable), then automatically resets the system when conditions are more favorable. With Wind-Clik you’ll save water, worry and money as your system will only be operating at the times when you can be sure that the water intended for your landscape will reach its destination. For effective wind control, you’ll be blown away by Wind-Clik…instead of simply seeing your water blown away by the wind.
FEATURES & BENEFITS
Designed for two types of operation
Either “normally open” or “normally closed” wiring
Adjusts to actuate at various wind speeds
Sets to shut down system from 12 to 35 mph
Adjustable reset wind speeds
Set from 8 to 24 mph, based upon local conditions
Can control fountain systems
Eliminates overspray during windy conditions
5-year warranty
Your guarantee of dependable operation
SPECIFICATIONS
MODELS
WIND-CLIK - Wind-Clik Wind Sensor
DIMENSIONS
• Height: 3.9"
• Wind vane diameter: 5"
SPECIFICATIONS
• Switch rating: 120VAC 5 amps
• Rated: 24 volts 5 amps as wired Wire “normally open” or “normally closed”
• Wind speed adjustment: Actuation: 12 to 35 mph; Reset: 8 to 24 mph
• Mounts: Slip fits over 2" PVC pipe or attaches to 1/2" conduit with adapter
(supplied with unit)
| SPECIFICATION GUIDE |
| EXAMPLE: WIND-CLIK |
| MODEL WIND-CLIK |
| Note: To add Bypass Switch Box to any non-Hunter controller installation, specify BPSW with sensor. Bypass switch function is standard in all Hunter controllers. |
LITERATURE
Wind-Clik Brochure (205.29 Kb)
Wind-Clik Instruction Sheet (33.17 Kb)
Sensors Product Information Guide (3.61 Mb)
RELATED LINKS
Wind? Rain? Freeze? Now You Can Weather the Storm With Hunter's Line-up of Sensors